sprocket-device-blackbox/lib/esp32_lora_wifi/LoRa/examples/LoRaReceiver-OLED/LoRaReceiver-OLED.ino

#include <SPI.h>
#include <LoRa.h>
#include "SSD1306.h"

SSD1306  display(0x3c, 4, 15);

//OLED pins to ESP32 GPIOs via this connection:
//OLED_SDA -- GPIO4
//OLED_SCL -- GPIO15
//OLED_RST -- GPIO16


// WIFI_LoRa_32 ports

// GPIO5  -- SX1278's SCK
// GPIO19 -- SX1278's MISO
// GPIO27 -- SX1278's MOSI
// GPIO18 -- SX1278's CS
// GPIO14 -- SX1278's RESET
// GPIO26 -- SX1278's IRQ(Interrupt Request)

#define SS      18
#define RST     14
#define DI0     26
#define BAND    433E6


void setup() {
  pinMode(16,OUTPUT);
  digitalWrite(16, LOW);    // set GPIO16 low to reset OLED
  delay(50); 
  digitalWrite(16, HIGH);
  
  display.init();
  display.flipScreenVertically();
  display.setFont(ArialMT_Plain_10);
  display.setTextAlignment(TEXT_ALIGN_LEFT);
  
  Serial.begin(115200);
  while (!Serial); //if just the the basic function, must connect to a computer
  delay(1000);
 
  Serial.println("LoRa Receiver"); 
  display.drawString(5,5,"LoRa Receiver"); 
  display.display();
  SPI.begin(5,19,27,18);
  LoRa.setPins(SS,RST,DI0);
  
  if (!LoRa.begin(BAND)) {
    display.drawString(5,25,"Starting LoRa failed!");
    while (1);
  }
  Serial.println("LoRa Initial OK!");
  display.drawString(5,25,"LoRa Initializing OK!");
  display.display();
}

void loop() {
  // try to parse packet
  int packetSize = LoRa.parsePacket();
  if (packetSize) {
    // received a packets
    Serial.print("Received packet. ");
    display.clear();
    display.setFont(ArialMT_Plain_16);
    display.drawString(3, 0, "Received packet ");
    display.display();

    // read packet
    while (LoRa.available()) {
    String data = LoRa.readString();
    Serial.print(data);
    display.drawString(20,22, data);
    display.display();
    }

    // print RSSI of packet
    Serial.print(" with RSSI ");
    Serial.println(LoRa.packetRssi());
    display.drawString(20, 45, "RSSI:  ");
    display.drawString(70, 45, (String)LoRa.packetRssi());
    display.display();
  }
}