mirror of
https://gitlab.com/wirelos/sprocket-plugin-gpio.git
synced 2025-12-14 13:26:48 +01:00
60 lines
1.5 KiB
C++
60 lines
1.5 KiB
C++
// This example just provide basic LoRa function test;
|
||
// Not the LoRa's farthest distance or strongest interference immunity.
|
||
// For more informations, please vist www.heltec.cn or mail to support@heltec.cn
|
||
|
||
#include <SPI.h>
|
||
#include <LoRa.h>
|
||
#include<Arduino.h>
|
||
|
||
// WIFI_LoRa_32 ports
|
||
|
||
// GPIO5 -- SX1278's SCK
|
||
// GPIO19 -- SX1278's MISO
|
||
// GPIO27 -- SX1278's MOSI
|
||
// GPIO18 -- SX1278's CS
|
||
// GPIO14 -- SX1278's RESET
|
||
// GPIO26 -- SX1278's IRQ(Interrupt Request)
|
||
|
||
#define SS 18
|
||
#define RST 14
|
||
#define DI0 26
|
||
#define BAND 433E6 //915E6 -- 这里的模式选择中，检查一下是否可在中国实用915这个频段
|
||
|
||
int counter = 0;
|
||
|
||
void setup() {
|
||
pinMode(25,OUTPUT); //Send success, LED will bright 1 second
|
||
|
||
Serial.begin(115200);
|
||
while (!Serial); //If just the the basic function, must connect to a computer
|
||
|
||
SPI.begin(5,19,27,18);
|
||
LoRa.setPins(SS,RST,DI0);
|
||
// Serial.println("LoRa Sender");
|
||
|
||
if (!LoRa.begin(BAND)) {
|
||
Serial.println("Starting LoRa failed!");
|
||
while (1);
|
||
}
|
||
Serial.println("LoRa Initial OK!");
|
||
}
|
||
|
||
void loop() {
|
||
Serial.print("Sending packet: ");
|
||
Serial.println(counter);
|
||
|
||
// send packet
|
||
LoRa.beginPacket();
|
||
LoRa.print("hello ");
|
||
LoRa.print(counter);
|
||
LoRa.endPacket();
|
||
|
||
counter++;
|
||
digitalWrite(25, HIGH); // turn the LED on (HIGH is the voltage level)
|
||
delay(1000); // wait for a second
|
||
digitalWrite(25, LOW); // turn the LED off by making the voltage LOW
|
||
delay(1000); // wait for a second
|
||
|
||
delay(3000);
|
||
}
|