1.5 KiB
Esp8266-Laser
Wifi Host for the Arduino-Laser-Spirograph
HTTP GET endpoints:
/motor/{motorNr}/{value}
/laser/{value}
/saveconf -> write wificonfig to file
/resetwifi -> reconnect wifi with the new settings
/wificonfig -> GET returns wifi settings
POST sets new wifi settings
apMode=0: will try to connect to SSID first, 1: will directly start the AP
SSID=ssid
password=password
save=true will save config to spiffs
apply=true will reset wifi and try to connect with new param (buggy atm)
/readvalues -> return laser and motor values (all 0 at startup, ram only)
Install
-
install arduino ide (1.8.5)
-
follow this instruction https://github.com/esp8266/Arduino#installing-with-boards-manager
-
clone/exctract repo to sketchbook
-
install this libaries https://github.com/plerup/espsoftwareserial https://github.com/bblanchon/ArduinoJson/
-
follow this instruction: set wifi parameters in data/wifi.json before upload
http://esp8266.github.io/Arduino/versions/2.0.0/doc/filesystem.html#uploading-files-to-file-system
You may also need to:
- get and install driver for nodemcu https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
Development
Frontend
Frontend development requires NodeJS / NPM.
Run development server:
npm run dev
Build distribution source:
npm run build